Édition limitée à 20 exemplaires au tarif de 791 500 €.
Technical Specifications:
• Calibre RM25-01
• Manual winding tourbillon movement
• Power reserve: 72 hours (+10%)
• Baseplate and bridges in grade 5 titanium
• Competition chronograph movement
• Torque indicator
• Function indicator
• Free-sprung balance with variable inertia
• Fast-rotating barrel (6 hours
per revolution instead of 7.5 hours)
• Barrel pawl with progressive recoil
• Winding-barrel teeth and center-wheel
pinion with central involute profile
• Modular time setting mechanism fitted
against the caseback
• Spline screws in grade 5 titanium
for the bridges and case
OTHER FEATURES
• Movement diameter: 38.95 mm
• Thickness: 8.37 mm
• Tourbillon diameter: 12.30 mm
• Balance wheel diameter: 10.00 mm
• Jewels: 35
• Balance wheel: Glucydur
,
with 2 arms and 4 setting screws
• Moment of inertia 11.5 mg.cm2,
angle of lift 53°
• Frequency: 21,600 vph (3 Hz)
• Balance spring: elinvar by Nivarox
• Shock protection:
KIF ELASTOR KE 160 B28
• Centre bridge in titanium
• Barrel shaft in nickel-free Chronifer
(DIN x 46 Cr 13 + S),
with the following characteristics:
stainless antimagnetic suitable
for tempering
FINISHING
Movement
• Hand-polished bevelling
• Hand-polished locking-sections
• Bridges hand-smoothed following
PVD treatment
• Microblasted milled sections
• Lapped and polished contact points
• Burnished pivots
Steel parts
• Wire-drawn and microblasted surfaces
• Hand-polished bevelling
Wheels
• Diamond-polished sinks
• Circular decorations on the front
surfaces
• Rhodium plating
(before cutting the teeth)
• Minimal corrections applied
to the wheels in order to preserve
geometry and performance
CASE IN CARBON TPT
Carbon TPT
is an exclusive material with a unique appearance. Its remarkable surface displays extremely regular striations, as Carbon TPT
is composed of multiple layers of parallel filaments obtained by separating carbon threads. With a maximum thickness of 30 microns, the Carbon TPT
layers are saturated with resin then piled onto a special machine that modifies the orientation of the fibres by 45° between layers. Once it has been heated to 120°C and subjected to a pressure of 6 bars, the Carbon TPT
is machined at Richard Mille's case factory.
The case of the RM 25-01 is water resistant to 100 metres, ensured by two Nitrile O-ring seals. The case is assembled with spline screws in grade 5 titanium and abrasion-resistant washers in 316L stainless steel.